Vernier caliper is one of the precision dimensional measuring instruments that is used in many areas such as manufacturing, workshop, school, automotive, etc. It gives decent accuracy with nice reading graduation which is totally better than using a ruler.
By means of this vernier scale caliper, you can measure length, width, external diameter, internal diameter, and even depth. All of them can run without a battery.
Mostly used calipers can be grouped into three types: vernier caliper, dial caliper, and digital caliper. There are 10 best dial calipers as well as 10 best digital calipers that we have successfully compiled on this blog. Now, it’s time to turn to the best vernier caliper selection.
In this article, we are all about to discuss the 10 best vernier calipers that we dug from the market. We went through each of the specifications and compared them with the other vernier calipers. After we pointed every specification, we came to our final ranking. Without further ado, let’s go to our vernier caliper reviews.
Top 10 Best Vernier Caliper Reviews 2021
Let’s have a glance at the summary table of the ranking above. After the summary table, you could read each of the products in detail.
1. Mitutoyo 530-312 Most Accurate Vernier Caliper [Best Overall]
Here comes an excellent product from the Mitutoyo that becomes our first recommended vernier caliper. It’s a Mitutoyo 530-312. If you are looking for the most accurate vernier caliper, then this one will fulfill your requirements.
This caliper gives you a great resolution of 0.001″ or 0.02 mm. It doesn’t just give a great resolution, it also provides a fine accuracy of ±0.0015″ or 0.03 mm. Keep in mind that though a particular tool has good resolution, if the accuracy is terrible, then it’s not reliable. Mitutoyo is a renowned company in the market for precision measuring instruments. Though the resolution and accuracy are similar to other vernier calipers, Mitutoyo’s products are reliable in terms of accuracy and easier to trust their claim.
The measurement range is like the general caliper, it measures up to 150 mm or 6 inch which is good as most people are suitable with this range. It is made of stainless steel with satin chrome finished. The stainless steel material is important for long last use.
It’s not just about the specification that convinces you, but you could also get assured by the certificate. As said, it provides you to request the NIST calibration certificate. For professional measurement projects, to meet the standard, this NIST certificate is important to have.
For better protection, it comes with a protection box to secure your pricey and valuable instrument. Inside the box, it contains the Mitutoyo 530-312 vernier caliper, vinyl holster, fitted cartoon, and finally, the NIST certificate of calibration if you request it.
Comparing with the other vernier calipers, this one is quite expensive but gives a bang for the buck. If you are looking for a reliable and stable product, this one will be the best suggestion from us. Finally, this is the best vernier caliper overall that we recommend.
- Most accurate, secure, and straightforward to operate.
- NIST traceability ensures reliability.
- The plastic box ensures the protection of the caliper.
2. Mitutoyo 530-101 Vernier Caliper [Second Recommendation]
Mitutoyo is a famous brand in the recent market. This Japanese company has released many types of precision instruments. Among them, this Mitutoyo 530-101 vernier caliper got the highest attention from the buyers. Let’s see its specifications.
First, the operational specification has a range of 150 mm or 6 inches. The resolution is 0.05 mm, followed by accuracy of ±0.05 mm. This vernier caliper meets the federal accuracy specification GGG-C-111B. Second, it weighs 1 pound. The total length of the measurement range is 229 mm. The material of this caliper is stainless steel which is good with a satin chrome finish. Thus, it helps to reduce glare.
Mitutoyo products are reliable and then we put this at the second recommended vernier caliper. If you don’t need high resolution but require quality, Mitutoyo 530-101 can be your decision. This caliper also has a high rating from the buyers. It has an excellent finishing that will ensure its stability.
- Simple and easy to operate.
- Accurate and stable.
- Low-quality packaging
3. KHCRAFT Vernier Caliper
Khcraft is also an excellent product in the recent market that comes with a friendly price. If you are on a budget, you may want this one. But yet it ensures the quality of the product and it takes a remarkable position in the market.
The most exciting feature from this Vernier caliper is, it provides everything necessary for the caliper. It is a competitive product with the Mitutoyo brand from japan. Let’s come to the specifications of this Vernier caliper.
The resolution comes as usual 0.001″ or 0.02 mm. Following this, it has an accuracy of ± 0.001″ or 0.02 mm. Comparing other calipers, this one got the most accurate specification. The measuring range is 0 – 6 inches or 150 mm.
The body is made of real stainless steel chrome plated. It is not well finished, and thus it can not meet the quality like the first two. It weighs 12.6 ounces. The packaging size Is 10 x 3.8 x 1 inch.
The unique feature from this caliper is the 26 blade steel filler gauge. Here, the metric sizes are from 0.04 mm to 0.64 mm. The dimensions in an inch are from 0.00015″ to 0.025″. It comes with a protective box that ensures the durability of the product.
If we consider every feature from this instrument with the other element, we will find that KHCRAFT has enough features to be the best. But why we didn’t take it to the first pick? Because considering the price, the quality of the product can not meet like the Mitutoyo 530 – 101 or 530 – 312.
- Accurate, Simple, and easy to operate.
- Stable and durable.
- Very cheap.
- Free Gauge blocks.
- Not well finished.
- The upper and lower digits are tiny. And thus, low sight vision may find problems detecting the size.
4. Nortools Vernier Caliper
It has a resolution of 0.001 inches or 0.02 mm. Following this, it has an accuracy of 0.001 inches or 0.02 mm. This instrument has a range of 0 – 6 inches or 150 mm. The material of this instrument is also stainless steel. It is high-quality satin chrome finished.
Nortools also provides the blow-molded, cushioned case. It will keep your instrument safe. The difference between the vernier calipers of Nortools and Khcraft is in their features. First, Nortools doesn’t provide the steel blade feeler gauge. Second, Nortools finishing is better than Khcraft. But, it’s not easy to read the Nortools reading number.
- Accurate, Easy to operate.
- Excellent finishing like Mitutoyo.
- Sturdy Blow-molded box ensures its portability and durability.
- Very cheap.
- Difficult to read, the digits are small.
5. Mitutoyo 530-316 Vernier Caliper
Another excellent model from the Mitutoyo vernier caliper group is this 530 – 316. It is almost similar to that of the other two. But a few features are different. This one has a resolution of 0.0078″, and an accuracy of ± 0.002″. It has the Vernier face both for the metric sizes at the lower part and the inch sizes at the upper part.
However, It is also made of stainless steel with satin chrome finished. It weighs 5.1 ounces. This model is very standard. It has comparatively bigger size of the digits in the middle of the scale. Therefore, It is easy to read and operate.
- Simple and easy to operate.
- Accurate and stable.
- Expensive comparative to the Mitutoyo 530 – 101.
- No protective box feature. So, it can’t ensure durability. Anytime it may get damaged due to external damage.
6. Mitutoyo 532-120 Vernier Caliper
Another caliper from the Mitutoyo Japanese brand is this 532 – 120 vernier caliper. It is longer in size, mostly used for the bigger size of objects. It has a measuring range of 300mm or 12″. The resolution is 0.001″ following accuracy of ± 0.0078″.
This vernier caliper is sky bluish in color. The fine adjustment is to control the slider movement for better precision measurement. The number on the upper and lower scale is tiny. Hence, people with a low sight vision will face problems detecting the value.
All other specifications are similar to the other Mitutoyo products. It weighs 7.1 ounces and has a packaging size of 1 x 1 x 1 inch. It is made of stainless steel with satin chrome finished. Like all other Mitutoyo instruments, this one also follows the federal accuracy specifications GGG – C – 111B.
- Accurate, Easy to operate.
- Stable because of the metallic mechanism.
- Small digits make hard visibility.
- No protecting box. And thus it doesn’t ensure the durability.
7. Mitutoyo 531-128 Vernier Caliper
The last model we took from Mitutoyo is this Vernier caliper 531 – 128. This caliper has a unique feature among all of the calipers from Mitutoyo. If we observe, we will find that it has an advanced thumb lock feature on it.
This caliper also follows by the federal accuracy specifications GGG – C – 111B. The number on the vernier caliper has excellent visibility. People with any age can easily detect the value.
This caliper has the measuring range up to 150 mm or 6″. It has the graduation of 0.001″, following accuracy of ± 0.0078″. Moreover, it weighs 1 pound and a packaging size of 9.7 x 3.8 x 0.7 inches. It is made of stainless steel with satin chrome finished.
- Accurate, simple, and easy to operate.
- Easy to read.
- No protection box.
8. Fowler 52-057-004 Vernier Caliper (4″)
Fowler 52 – 057 – 004 vernier caliper is a precision instrument from Fowler Precisions. The company situated at 66 Rowe street, newton, Massachusetts, United States of America. This model is also a very standard among all. It is a very small vernier caliper. You can carry it in your pocket. It has a measuring range of up to 4 inches.
This caliper is not metric sized. It has the sizes of inches. It is the most important thing here we must consider. Most of the product here is all metric based Vernier caliper. This product can be a unique choice of yours. Depending on the uses of your workshops, you can decide whether you need a metric Vernier caliper or an inch one.
This caliper has a resolution of 0.001″. Moreover, it is too light to carry. It weighs only 0.75 ounces. It is made of stainless steel with satin chrome finished. Thus, visibility is apparent.
- Accurate, simple, and easy to read and operate.
- Very light. You can carry it in your pocket.
- No protective box provided.
9. Preamer Mini Brass Metric and inch Vernier Caliper
Another mini Vernier caliper we found is from the preamer manufacturer. This company provides two pcs of mini Vernier caliper. One of them is metric, and the other one is for the inch. There are several sectors where we can use this caliper—for example, industrial work, jewelry, gunsmithing, etc.
It has a resolution of 0.01 mm. The measuring range is up to 3.15″ or 80 mm. It has an increment of 1/16 inches or 1 mm. This Vernier caliper is a solid brass material manufactured. It weighs 2.39 ounces. The packaging size is 5 x 1.9 x 0.7 inches.
This Vernier caliper can be the best choice if you are looking for general use of it. If you don’t need to measure the depth and other two measuring steps, then this instrument can be the best suggestion because it can only estimate the outer dimension of the object.
- Easy to read
- Easy to carry and clean.
- Accurate and stable.
- Not professional Vernier caliper because it can not measure the other three essential measurement steps.
- There is no protective box provided.
10. T&B Double Scale Plastic Vernier Caliper
Our last pick goes to T&B plastic Vernier caliper. Here, this Vernier caliper has all the specifications we mentioned above. It is not stable and professional. If you need it for rough uses, this one will be the best choice.
It has a measuring range up to 6 inches with a resolution of 0.001″ and an accuracy of 0.05 mm. The company will provide five pcs with the same specifications together. It is a super cheap product with the best suggestion. If you go through the customer reviews, you will get lots of advice from them. Though it’s plastic material yet can work properly.
- Super cheap
- Accurate and easy to operate.
- Easy to carry and read.
- Plastic material can not ensure stability and durability.
- Not very professional.
Things to Consider Buying Vernier Caliper
We have discussed the top 10 vernier calipers in the amazon. Moreover, we have pointed out each specification. We have also distinguished the differences between similar brands. Finally, we again suggest you focus on the following points before you go to choose your Vernier caliper. These points are the essential sides you will face while using a Vernier caliper.
We will find a few instruments such as Fowler 52-057-004, T &B Double Scale Plastic Vernier Caliper, etc. have small digits on the scale. Thus people with low sight vision may make a mistake taking a reading. Therefore, the printed number must be bright and big enough for easy visibility.
Accuracy is one of the most important things that we must consider. Most of our Vernier caliper here has accuracy in between of 0.02 mm to 0.05 mm. Except for the PREAMER brass sliding mini Vernier calipers, all are in the standard range. It is just an mm scale with a sliding feature.
3. NIST Traceability
Calibration is the most important for any precision instrument. Because we always want our tool errorfree. Therefore, the product with NIST traceability is the most accurate. If you are interested in NIST, please read this blog to know more about it.
4. Protecting Case
Maintenance is essential for any device. We must keep it safe after we have finished our operation. Therefore, the product with this feature will help you to protect your instrument from any external damage. KHCRAFT, NORTOOL, they usually provide these facilities.
We do not want to waste our money. In that case, we must find our needs. If our demand fits with the simple and cheap products, why not we choose that one? Most of the expensive instruments are of higher quality than the others.
6. Customer Review
The customer review is the place where you can get the original state of the product. The customers who already bought the product know how the product is. Therefore, before we go to choose our product, we must have a glance at the customer review. Though we already made that easy for you, so we hope we won’t need to find for the customer reviews.
Vernier Caliper Maintenance Guide
Vernier caliper is a precision instrument for accurate readings. Therefore, maintenance is essential for any precision instrument. Moreover, as long as we use our vernier caliper, we must keep in mind that we have to follow these steps before or after we operate any measurement.
1. Rub off any dust
Dust or dirt on the Vernier caliper may cause inaccurate measurement. Therefore, before we go for any operation, we must check it out. If there is any dust or dirt there, we should rub it off.
2. Do Not Use the Vernier scale that is not recommended
We should not pair our Vernier caliper with heavy instruments such as lathe machine, grinding or cutting tool, etc. It may cause any unfortunate accident. So, we must be careful about this.
3. Use the Vernier scale for the specific function
We can not use the Vernier scale alternative to other precision instruments. We should use our caliper in the primary four operations that we knew from above. One may use it to draw margin or other staff. DO NOT do it. It may cause inaccuracy of the caliper.
4. Do not keep your Vernier caliper in unfavorable temperature
Temperature is very important for the metal. The accessive heat may cause the deformation of the metals. If you know about the stress analysis of metals, you can clearly understand this point. Therefore, we should not keep our Vernier caliper in any unfavorable temperature side.
5. Be careful while taking the measurement and know your location
While taking the measurement, we must be careful about the location of the caliper. Someone may not know about the place. They may cause any tragic accident. Therefore while you are the user, you should keep in mind where is your caliper is.
6. Do not attempt to repair it by yourself
We suggest not to attempt to repair your caliper by yourself. It is a precision instrument. So, consult any specialist about fixing it.
7. Clean up everything after it serves
This point is the most common maintenance of any operation. We should clean up everything after we have finished the measuring.
At this time, we hope that we could make your research over the best vernier caliper becomes so much easier. We already spent a lot of time selecting these products. And we went through each of the specifications, differences, and customer reviews as well. And finally, we came to this final stage.
Therefore, we first suggest you decide your demand. And then, secondly, find your budget. Finally, follow our guidelines.
If accuracy is the first thing you are looking for and no matter the price, then Mitutoyo 530-312 is what we recommend. If you require product quality with decent resolution and accuracy, then Mitutoyo 530-101 vernier caliper can be your choice.
Stay with us, and we are always by your side with the best suggestion for the products. What you need to do is simply find your category and then specific rankings from our blog. If you didn’t find your product, just hit the contact button and let us know. We wish you the best of luck on your project.